VSM300 series shaker screen replacement for sale

VSM300 Series shaker screen

VSM300 series shaker screen is for NOV Brandt VSM300 shale shaker. V300 shale shaker is famous model. It including 3 shaker decks. 3 decks consist of an integrated scalping deck (3 screens), a primary deck angled at 7° incline (4 screens) and an integrated drying deck (2 screens; optional).

Shaker screens on 3 decks are different on size and appearance. They also have different functions. Scalping deck will filter coarse solids out of drilling fluid. Primary deck will get rid of finer cuttings, while the secondary or drying deck will make discharged solids more dry

Original VSM300 series screen are steel framed one. But presently, many shaker screen manufacturer developed the composite frame V300 screens

vsm300 series shaker screen

How to select V300 series screen?

For VSM300 shaker screens there will be VSM300 light weight XF and RHD type. The difference between them is cut point based on D100, conductance, and non-blanked area. Select VSM300 series shaker screen should be according to the actual demand.

Do we need to replace which panel of screen? Usually, users will order the primary deck shaker screen. Comparing the shaker screen quality from appearance to the quality and practical performance. To verify screens quality we kindly suggest test screen sample under different working condition

When selecting a screen, end users should pay special attention to the screen design and the size of the opening.

Each screen directly influences the ability of the shaker to achieve solid/liquid separation and consistent conveyance. As a general rule, coarser screens are placed on the rear and lower decks, while finer mesh screens are placed near the output. If using a dual deck shaker, finer screens are usually located on the top deck and more coarse screens on the bottom.

VSM300 Shaker screens

Operators should remember that finer screens wear more quickly, especially when subjected to high volumes of solids, such as when top-hole drilling is occurring. Experience will also help guide screen selection regarding flow rate and solids type to maximize solids removal and discharge dryness

More detail on VSM300 screen

VSM300 primary deck screen configured with rubber seal at one side of screen panel. While the drying deck screen is rather small sized. Considering practical operation, most users don’t use the secondary deck screen

Based on different deck screen function the scalping deck screen will be coarse, and the primary deck will be much finer, of course, the secondary deck screen is the finest one.

The V300 series shaker screen panel can be designed with hexagonal hole or triangle hole.Original ones are very beautiful with different sized holes. However, presently, most replacement ones are very simple with same holes. To cater more and more users’ preference shaker screen manufacturers will improve the technique by and by. Both on appearance and quality.