Shale shaker screen material means material used to fabricate complete screen panel.

Shale shaker screen material

To understand shaker screen material well, detail and complete analysis on screen panel is necessary. Including know shaker screen structure, different parts.

Always get inquiry from client "shaker screen for King Cobra, kindly advise the material and layers". If simply to provide quotation and give them general information, the material is S.S 304, S.S316, S.S316L.

Shale shaker screen material

Sometimes, screen cloth material may be different between layers. As consider best cost-efficiency, we may use S.S316L only on super fine mesh or the special fine configuration on screen

Besides screen cloth material, there are frame, back metal plate and seal rubber. Back metal plate is usually the cold rolled sheet. Moreover, coating or glue material are rather essential as well. The excellent material will provide strong adhesive ability and the durability. Also more beautiful appearance

Different features of screen material

Manufacturers will make the shaker screen in different manner. Including material, configuration, technique, etc. So, even same mesh size screen operated under same working condition the result will differ greatly

Shaker screen material

High quality stainless steel screen cloth will benefit much on screen life. It is basic requirements on shale shaker screen material. Qualified S.S is high corrosion-resist, rust-resist. Chemical content, and physical features are much better. Quality screen cloth holds high conductance and larger non-blanked area

For the seal rubber on screen, usually they are sticked on panel back. Optimal material is HNBR or NBR. It is flexible, better sealing, and oil-resistant. Shale shaker screen material for special screen will differ from common ones. Such as the replacement FLC500 screen back seal rubber is a special configuration. It is different from HNBR. But it is soft, good sealing, and heat-resistant as well

Shaker screen

Various of screen material

Shale shaker screen material, broadly speaking, there are stainless steel one, and the polyurethane one, the iron, the steel one, and so on. Per use and working condition.

But, details including wire mesh specification. Such as S.S grade, the wire diameter, the hole size, and so on

There is too much detail should be confirmed if professional manufacturer or consultant. However, we have the market experience and general result on various screen material performance. Thus based on working condition Aipu will provide optimal screens for you

Please come to us if any doubt or interest. Find shaker screens for you

Shaker screens material is not only the screen cloth material but also the plate, the frame, the rubber strip, etc.

General shaker screens material

To get all materials cleared firstly lets introduce shaker screen structure or parts. Shaker screen panel consists of screen cloth, plate/or support frame, the rubber strip under tube. Usually, the screen cloth also called the wire mesh is made of high quality S.S304~316L to insure rust-free, and more durability. Based on clients' demand the wire grade is optional at different budget level.

shaker screens material

For the plate supporting screen layers, almost of them are made of cold rolled plate (a kind of carbon steel plate) thicks 1.5~2mm. Rare clients will request S.S plate. The plate will be punched with different shape holes. The plate will be punched with certain shape. Such as rectangular, square, triangle, hexagonal, and so on. On one single shaker, the holes can vary, too. We know famous brand NOV Brandt@ screen VSM@, Venom@ punched with different size triangle.

The support frame will be welded with square tubes and plate together if the screens are steel framed one. If the shaker screen panel is composite framed the square tubes will be welded well and embedded in composite material after injecting plastic process. The composite material consists plastic, rubber, fiber, etc.

Ye, there are also the polyurethane screens made of high quality urethane with 2 side support rod embedded in urethane material. Another type urethane screen is made by M-I SWACO™

Different shaker screen appearance

Thanks to various shale shaker type we have shaker screens appearance differ variously. For example, Derrick Corporation produce the FLC500™ series screen as PWP™, PMD™, and PMD+™ types. That means the screens surface are flat, and corrugated.

Shaker screens appearance

Then the shaker screens can be hook strap ones both soft and hard back support, can be framed type. On shaker screen panels, we can find many different shaped holes punched on support plate. Such as the rectangular hole, triangle one, hexagonal hole, square hole, etc.

Final issue on appearance is the color. Presently we provide green, blue, red, gray, orange colored screens. Others will be available upon requests

More options on shaker screen

About 20 years shaker screen experience we know many clients will have customized demand. So we provide more options on shaker screen. Such as the perforated hole shape, the material, the color, the layers, etc.

Aipu solids control will work with you to ensure timely quotes and scheduled deliveries. Ask about your specific item or product needs, and we will do our best to fulfill your requests. We make every effort to make sure every screen meets your standards.

*Derrick, FLC500, PWP, PMD, PMD+ are all marks of Derrick Corporation