Solids control shale shaker is the 1st equipment to process drilling mud in whole drilling fluids system. Why we call it as solids control shaker? Since shale shaker is mainly used to get rid of drilling cuttings by filtration and vibration. The cuttings are usually the harmful solids.

Solids control shale shaker introduction

Solids control really benefit much on well drillings. No matter oil&gas drilling, deep water well drilling, horizontal directional drilling, etc. Even process the drilling waste we also need to configure capable solids control unit

In solids control system, shakers are first phase equipment. We all know cuttings larger than 100 microns will be separated out of shaker. The shakers can be linear motion or BEM, also can be dual motion with different motors combination

Solids control shale shaker part

Shale shaker main parts

As shale shaker is rather important in solids control system all main parts are important as well. Shale shaker consists of vibrator motor, vibration beam, starter, shaker basket, shaker screen, springs, rubber seal on shaker deck, base frame, etc.

If no special requirements, all main structure material is high quality carbon steel. The shaker screens can be S.S304L~316L as different meshes request different screen cloth combination. Usually we get inquiries on shaker screens, vibrator motor, the rubber seals, springs, etc. parts.

To confirm the compliance between replacement and original parts we strongly recommend clients provide part number, picture, drawing with size, etc. Since different customer may call same parts by various name. Above information will be helpful to confirm right replacement part

Get shaker parts price

Aipu solids control produce complete line equipment for well drilling fluids process. We have our own designed shakers and other mud equipment. Aipu will provide complete lines spare parts at reasonable price for clients' convenience and easy maintenance

Shaker spring

Meanwhile, you'll get other shaker parts of different manufacturers here. Such as the shaker screen panel, the repair plugs, the rubber seal, the vibration motor (Martin/Ita-Vibras), springs, etc.

Get the qualified shaker parts at best price. Please contact Aipu solids control for certain shaker parts price

Spare parts for shale shaker are also important for users. Shale shaker is the first phase solids control equipment. All users treat it as critical device. Drilling fluid out of choke manifold will flow into shaker to separate cuttings larger than 74 microns out. To make sure shaker perform best we have to check all matters well. Such as whole shaker wearing, parts abrasion, etc.

Spare parts of shaker

Firstly, please lets find out shaker parts. What are main parts of shale shaker? Shale shaker mainly including shaker basket, feeder box, vibrator motor, vibration beam, start panel, base frame, shaker screen, screen tensioning system, rubber strip, etc.

Usually, the spare parts are shaker screens, tensioning system, spring. The shaker screens are various types so the tensioning system are different as well. Compared to other wearing parts, shaker screen are more easy to wear. For some shakers there are wedge blocks as tensioning part, they are spare parts, too. The jack screw or screw rod for angle adjustment is spare part, too.

Actually, for spare parts or maintenance of shaker we suggest use the shaker legally and check the condition regularly. But no only replace the parts or repair the shaker. Sometimes, we just need to run shakers according to user manual and maitain them properly. We may even don't need to replace some parts. This will help us to decrease general cost and save time.

Spare parts-spring

Wearing parts for famous shale shaker

As a shale shaker manufacturer, we also get inquiries on wearing parts for shaker. Most of the clients will request us to quote price on wearing parts for famous shaker. Such as parts for Mongoose, for Derrick 500 series, NOV Brandt King Cobra shaker, etc.

Usually, the wearing parts are shaker screen, tensioning system, spring, channel protector, etc. Most popular one is shaker screen tensioning system for Derrick FLC500 series shaker. And some of them will request wedge block for Mongoose or Cobra shaker

We presently, can produce wedge blocks for Mongoose and Cobra shaker and 500 series shaker tensioning system. But for tensioning system of 500 series shaker we kindly request MOQ. As different wearing parts request different technique and materials we have to quote accordingly

Buy spare parts from Aipu

Aipu does not produce high quality shale shaker but also shaker parts. Such as shaker screens, rubber strip, channel protector, springs, etc. We produce high quality shale shaker parts for different famous brand and model shaker

Some clients like to order vibration motor (vibrator) as spare part along with the shale shaker or mud cleaner. There are different types of vibrators, such as long motor and short motor, 2HP or 2.5HP. And for many famous shakers, AIPU can provide the right fit replacement motors. Such as the SGX, SG2X, Ital-Vibras or Oli. Please tell us the shaker model number, or the motor model, frame if possible

If you are interested or facing any question  please contact Aipu freely. We promise all clients best price but high quality items. Please call us 0086-18691483929