Shaker screens is important wearing part. Replace shaker screens in time is vital, too. Screeb costs much during whole drilling project. Shale shaker runs from the very beginning to the end of drilling.

How to maintain shaker screens

Shaker screens is the exact media contacting drilling cuttings. Drilling fluid with cuttings or harmful solids flow through screen panel, and then under vibration filtering particles out. We know screen cloth, especially the surface layer is thin or extra thin, it's easy to broken. Hard and heavy materials abrade wire mesh much, then there are many broken holes or pieces on panel.

To maintain shaker screen well is premise of good shaker performance. Exact filtration accuracy helps much controlling solids size and content. So during well drilling, we need to pay attention on right mesh size selection. And check the screen surface regularly. Besides screen itself, we need to check shaker condition, too. Such as tensioning system condition, sealing strip, and so on. Quality assistant parts of screen benefit screen maintenance.

Replace shaker screens

After every shut off, please remove screen panels and clean them by water. This will eliminate abrasion on screen cloth if use it next time. When we get clean screens, store them at a dry safe place. Kindly recommend 12 month as shelf life. The hook strap screen and composite frame screen, as well as screen with rubber strip will be affected by time and ambient condition. So shorter storage time ensures better performance

Why do we replace screen in time?

When shaker screen is broken, there is hole or area without separation layer or even no screen cloth on frame. So either the useful drilling fluids or the drilling fluids mixed with harmful cuttings will pass trough the hole. Then screen function of filtration is then no use. And the subsequent equipment will bear more loading, also the equipment after shake will easy to break or wear.

To avoid further mud lose or cost increasing, replace shaker screens in time is rather necessary. Some times, if we change broken screens in time we could repair them and reuse. This will also help to save cost on screen panels.

Screen panel replacement

How to replace the shaker screen?

Stop the shale shaker firstly. If possible, lead drilling mud to the other shaker(s) for processing or cleaning. If the screens are installed by wedge blocks please knock the blocks out at direction conversed to the lower position. When blocks are loose remove them and pick up the screen panel. Replace used panel with a new panel.

If the screens are installed by the tensioning bar and bolts, please loosen the bolts and remove bars or remove panels directly. We know there are different ways install the panels. Traditional one is with tensioning bar, later version is with the air compression or the pressing pin. No matter which way, the tensioning tool should be loosened firstly.

Shaker screen change should be based on actual demand. According to the drilling depth, fluid flow rate, mud property, and so on.

Please feel free to contact AIPU for more information or details.

Shaker screens replacement for many different makes shaker are hot product at Aipu solids control. Today, we're gonna deliver over 400 panels screen to sea port and air port.

Shaker screens replacement information

There are replacement PMD 600 screen, 48x30 flat panel, the Cobra replacement screen, and so on. All these screens are for oversea client from different regions. Some were ordered by domestic company, some were ordered directly from clients abroad.

Shaker screens replacement delivery

Screens mesh size are from API 50 to API 300. Totally over 20 packages. All these screens are packed as cartons inside and plywood boxes outside. Some of them will be shipped by air, considered shipping weight and safety we use suitable plywood plate and compact package. All users may receive their product in one month at the most

How to order replacement shaker screens at Aipu?

Tell us your detail demand or any special requirements. We submit price for your reference. And we'll tell you some detail about our screen manufacture procedure, material, technique. That is for your reference or judgement on our price form

Replacement PMD600 screen

If you have further question or you need sample, please let us know. Especially for some project is big tender and you have sufficient time. We are happy to send you sample for comparison with other brand shaker screens replacement

Why Aipu screens?

Aipu shaker screens are famous brand and got high appreciation from users. We are not the lowest price, we are the most reasonable price supplier. Our products are high cost-effective. You will get high quality shaker screens at lower cost. You'll save time on changing screen panels and seeking quality suppliers

Aipu is API certified manufacturer. Aipu got API RP13C conformity report. Why don't you come to us for any question? Trust you'll obtain optimal solution and you'll be happy for our support. After using our screens, you end users will be happy and satisfied, too.

Cost-effective shaker screen means the screen priced reasonable with high quality or performance. How to verify or define cost-effectiveness on screen panel?

Shaker screen replacement quality and more detail

Replacement shaker screen quality should be based on screen appearance, separation efficiency and accuracy, usable life. The screen appearance including overall size, surface flatness, backside coating. Separation efficiency is from separation point and the conductance of screen. Usable life is usually known after comparison with original panel

Cost-effective shaker screen

As we know, the screen life impacted by many issues. Such as mud property, drilling condition, shaker condition, and so on. So, based on same working condition we can get objective result on quality

Detail about cost-effective shaker screen

Cost-effective shaker screen then can be verified accordingly. For example, under same drilling condition, mud property on same shale shaker the original screen lasts about 400 hours, and the replacement screen lasts about 350 hours. However, replacement screen is only USD100 than original priced USD400. Why don't you select replacement? Even we have to spend some time on screen replacement but it only takes minutes totally to save 3/4 cost in a whole well drilling.

Sometimes, screen manufacturers design and configure screen replacement based on original one. Some are better for quality or performance, while some may be worse. So many users are willing to insist original design as an insurance for better quality they expect

Replacement shaker screen PMD500

Verifying shaker screen replacement cost-effectiveness

As per above information, you may have a brief understanding on cost-effective shaker screen. How to get such screens? It's so easy!

Please firstly select some potential screen suppliers. Inquire them to send samples, against your receiving you can have a instant impression. Then please test them at the drilling site or in your own lab. Test the cut point, test the separation efficiency, test the service life. If possible, record all steps and do comparison report with final time and cost used

Trust you'll get true result and an objective verification. Or if you have time and higher budget, you can visit suppliers or manufacturers prior to requesting samples. Anyway, test will be most practical method.

Just feel free to contact us for further interest or question.

Derrick shaker screens replacement including many different types. Both OEM ones and replacement for other makes and models shaker. Well, Aipu shaker screen provides you cost-efficient replacement for Derrick almost shaker

Derrick shaker screens replacement

Derrick shaker screens replacement

For Derrick shaker models, there are FLC500 series, FLC2000 series, DP600, Hyperpool, FLC300 series, etcetera. Both shale shaker and mud cleaners. The detail model number is FLC503, FLC504, FLC513, FLC514, FLC2000-3, FLC2000-4, FLC313, and so on.

The shaker screens are hook strap screen including the flat panel, PMD and PMD+ panel. There are also polyurethane soft screen and polyurethane screen. Furthermore, they also produce the corrugated panel for other makes shaker. Such as VSM series, Cobra series shaker, Mongoose shaker and so on.

Derrick shaker screens configuration are DX, HP, and DF mesh types. But for bonding materials there are common and HT ones. The configuration of screen layers & mesh holes differ on wire diameter, aperture, and mesh size. These issues lead different conductance, cut point. The API sizes are API 35~API 325

Aipu replacement shaker screen for Derrick

Presently, Aipu shaker screen provide almost screens for Derrick shaker. Except the scalping deck 600 series screen panel, and the PMD+ screens. We produce high quality FLC500 series screen, 48x30 shaker screen, 600 series hook strap screen, the Hyperpool screen and so on.

Based on clients' requirement we can provide the corrugated screen panel of VSM300 and Cobra as well. Please find more information on our website and give us any comment if you like. Our price is rather competitive. So no matter you are end user or supplies company, you will definitely get optimal solutions at cost-effective basis. The mesh size are available from API35 to API 325.

How to order from Aipu?

Why do you order from Aipu? The main technician of Aipu shaker screen have engaged in shaker screens over 15 years. Our screens were proved at rig site and appreciated by many users. Actual feedback will give you more confidence. We promise clients cost-efficient solution, and continuously improvement under customer-oriented rule. Our shaker screens are API RP13C conformed. All the material are high quality and guaranteed.

When you place order please indicate detail information for best offer. Including makes and model, mesh size, appearance, or any special requirements on color, etc.

Contact us now for high quality Derrick shaker screens replacement free sample!

Derrick, FLC,Hyperpool are marks of Derrick Corporation

NOV Brandt, VSM, Cobra, King Cobra are marks of Varco I/P, Inc.

MONGOOSE are marks of M-I LLC.