Drying shale shaker is the shaker holding Hi-G vibration strength can achieve drying or dewatering effect. We usually use it in drilling waste management

Drying shale shaker description

Drying shaker can be used in oil base fluid waste process or water base mud waste management. Drying shaker at Aipu holding vibration strength up to 8.0G. Such high vibration strength will help to get better dewatering result

To achieve drying function, there are finer screen opening and higher vibration strength. Considering high volume and better result, higher upward deck angle is recommended.

Drying shale shaker

Different base drilling fluid, we will put on different type screen panel. Including the common solids control shaker screen, or the wedge wire mesh panel, the polyurethane panel, the punched sheet panel, and so on

Many users prefer large volume so we suggest twin shakers.

More details on drying shaker

For drying shaker, the linear motion is more suitable. Deck angle is suggested with a higher degree for better performance even with large quantity feedings.

Drying shaker at Aipu is 4-panel mounted. Sufficient filtration area will help get better process result with drier solids effluent. The vibrating motor is powerful with a strong vibration strength. We suggest 2.6HP, even 3.5HP

High mesh size with fine, extra fine cut point and strong vibration strength will help us get a drier discharge and save much cost on further disposal and dewatering

Urethane framed screen

Spare parts including shaker screen, rubber strip, spring, and so on. The vibration motor is easy to operate and maintain. Vibrator motor manufacturer doesn't suggest user repair motor avoid further inconvenience or damage.

Cost of Aipu drying shaker

Aipu drying shaker is competitive and high cost-efficiency. The qualified material, reliable motors and efficient performance are appreciated by users. Future maintenance is mainly the shaker screen replacement.

Upon the proper and legal operation, the motors can run up to 3 years with no failure. The spring can be replaced over 1 year. The rubber strip is rather anti-abrasive and anti-corrosive

For one year operation, including the shaker cost, it's only about USD20000. Please feel free to contact Aipu for detail quotation or further information

Drying screen is the shaker screen panel help dewatering during drilling fluid process or tailings management. No matter in oilfield, or civil construction.

Dewatering hydrocyclones with drying screen

The hydrocyclones separate solids out of drilling fluid under the centrifugal force. It will spray liquid mixed with cuttings to bottom shaker or the discharge ditch. After such procedure the unnecessary particles separated out of drilling mud. Under the bottom screen panel filtration the liquid with finer solid will drop into the tank. Dry cuttings will be transferred out of mud system under shaker vibration

The hydrocyclones can be desander or desilter also the mud cleaner combined them together. However, many civil construction will be limited much on space. So the compatibility between drying screen and hydrocyclone is very important for whole system.

Drying screen

Drying screen features

Presently, in the market there are many types of drying screen. Such as the polyurethane, stainless steel screen with woven wire mesh, the wedge wire screen / slotted wedge wire screen. They all have different benefits. Usually, we set bottom screen under hydrocyclone with high capacity and large hole.

Pre-screening will welcome 3mm opening to separate large particles out of liquid. And the screen should be strong enough. Drying shaker screen will bring user much benefit on whole cost deduction. Furthermore, we also recommend the double deck screen on one shaker. This will lead better drying effect and multi-function feature

Come to us for more detail

Aipu is professional manufacturer on solids control equipment and system. In oilfield, HDD, tunnelling, pilling, and so on, the solids control equipment will be widely operated. The drying screen is more and more popular for pre screening and the tailing process. For drilling fluid recycling, the waste management, etc.

In different project, we need different configuration on the shaker. No matter the G force, the screen area, motor power, size, etcetera. But we can firstly develop the modular design for a typical and general application. We highly welcome your any question or interest for more detail.