Bottom screens are the screen cloth on bottom shakers of hydrocyclone separator and mud cleaner. The screen types vary since the shakers design are different

Bottom screens types

There are different designs on bottom shaker for desander, desilter, and mud cleaner. Such as the mini bottom shaker with screen sized 1600x600mm with hook for downward strap, or the 1200x600mm.

There is also bottom screen same as common shale shaker Hunter-Mini or Hunter-MG3, and so on. The screens will be framed or hook-strap panel with area over 1.3M².

Bottom screens

Screens for bottom shaker of separator or mud cleaner can be Hunter-Mini, Huter-MG, or Hunter-D series shaker. Different clients will request different screen area based on actual condition and their budget

Hydrocyclone separator design on bottom shaker

Hydrocyclone separator including Desander and Desilter. Some clients prefer the discharge chute to the mini bottom shaker. Some clients prefer the big bottom shaker as primary shaker, such as Hunter-MG, Hunter-D.

The bottom shale shaker can be linear motion or circular motion. Bottom screens are tensioning rod mounted, or draw bar and bolts tensioned, or the wedge block compressed. The common mesh size varies from 100 to 270. Panels number can be 1~4 panels

Aipu bottom screens for cleaner

Bottom shaker for mud cleaner

Mud cleaner is the combination of shaker, desander and desilter.  For bottom shaker, we provide many options. Such as Hunter-MG3, Hunter-MG4, Hunter-Mini, Hunter-D3, Hunter-D4. For small mud cleaner we can supply the mini bottom shaker, too

And the motions including linear motion, BEM or the dual motion. Screen area varies from about 1㎡~2.9㎡. Screen types including pre-tensioned framed ones and the hook strap ones. The composite framed ones and the steel framed ones. The flat panels and the corrugated ones

Please get more information from AIPU solids now. Call us if you have any interest or questions. No matter your own bottom shaker screen or the replacement for other brand and makes screen, AIPU will be your reliable solution

Bottom shaker screen is the screen of desander, desilter or mud cleaner shaker. It is optional for desander or desilter.

Bottom shaker screen information

For drilling mud desander or desilter, the bottom shaker can be configured on or not per clients' preference. If there is no shaker, the discharge slide channel will be configured on.

The bottom shaker can be small one with ends tensioned below screen surface. Or the bottom shaker can be common model Hunter series with large screen area.

So, the screens are available on composite frame screen, steel frame screen, plastic back bonded screen, steel back hook strip screen. Unbonded screen will be supplied per certain requirement

Bottom shaker screen

Shaker on mud cleaners

We call mud conditioner as mud cleaner as well. It is combined with shale shaker, desander cone, desilter cone. Some clients will call desander or desilter as cleaner as well.

Bottom shaker and bottom shaker screen will provide finer separation on drilling fluid discharged from hydrocyclones. Furthermore, after bottom shaker screen process, the drilling mud will be drier than cones separation.

On mud cleaners, the bottom shale shakers can be linear motion, or BEM, or circular.

Bottom shaker screen on desilter

More options for bottom screen

For other options of bottom shaker screen are also available. Such as wedge wire mesh screen panel; the polyurethane shaker screen, etcetera. Polyurethane screens can be framed or just hook strip type.

Size and color are customizable as well. Such as, mesh size is from 10mesh to 400 mesh, or opening is from 1.5mm to 0.0375mm. Color can be red, orange, yellow, green, gray, and so on. The hole pattern or punched plate hole shape are customizable as well. However, suggested ones are more suitable or proper for clients operation

If you do have demand on bottom shaker screen please contact us freely. No matter for what makes or what models. Aipu will give you optimal solutions