Screen consumption is an important factor evaluate drilling cost or oil exploration cost. Proper operation or use on screen can certainly help to control cost well.
How to calculate screen consumption?
We know our shale shakers are fit with multiple panels screen. Such as 3 panel, or 4 panel, some are even five panels. Usually, we assume all of panels wear at the same time. For example, Hunter-MG4 shaker fit with 4 panels of API 140 screen. We assume all screen panels broken in 20 days. As the average life span of screen is about 20 days. So, every set shaker in 20 days will cost 4 panels screen
Screen consumption
We know some drilling site request not only 1 set of shaker, but 2 or 3 sets. That means you need screen consumption number by shaker quantity in a certain period.
That's the general and simple calculation. It's very useful and good reference for users
Any other details on screen consumption?
Yes. For sure. Some shaker screens during operation may not be damaged or broken. Some of them can be re-fit on shakers. So, when we remove screens please pay attention on cleaning and handling
AIPU Screen detail
We kindly suggest wash screen panels after every operation shift. And store the panels properly. When we do the purchase plan we can deduct panels in hand.
Purchase plan on shaker screens
Initially we calculate screen consumption based on shaker quantity, screen quantity, as well as suggestion from supplier. But after operation for a while, we will find some difference between plan and practice
Then we should do the purchase or stock plan as per practical information. Because there are many different drilling condition, mud property. Some shaker screens may last 20 days, some may just last 7 days.
Furthermore, screen panel at different position of shaker deck perform different. The panel at discharge end will last longer than the panel under feeder box
Please contact us freely if you have further question or any demand on shaker screen consumption